Jowacoll 103.10

PVAc D3 glue D4 glue with 5 % ppw of Jowat® Crosslinking Agent 195.40



For all bonding purposes requiring increased resistance to wet environments,
e.g. for doors, windows and furniture in high-humidity areas. General-purpose
glue for soft and hardwood bonding, as well as for particleboard and other
wood-based substrates, for high frequency bonding, also for laying parquet
and laminate (tongue-and-groove) flooring and for veneering purposes.

Directions for Use:

If used according to instructions, Jowacoll® 103.10 will meet requirements
according to durability class D3, after addition of 5 % Jowat® Crosslinking
Agent 195.40, the durability group D4 according to the EN 204/205 will be
Frost-resistant following the GOST 1899 2-80.

We recommend that all materials coming into contact with the glue are
made of high-quality stainless steel (German standard V4A or better) or
of inert plastics, e.g. Teflon, PP, polyamide. Avoid contact with other
metals like zinc, brass, copper or aluminum. For more information,
contact the equipment manufacturer or our technical service.

For all standard applicator systems. Reactive PVAc dispersions may undergo
an increase in viscosity during the storage period, due to their components.
Higher temperatures contribute to this increase in viscosity. The product
should therefore be stirred before use. Avoid contact with alkaline substrates
or with iron, tanniferous wood may discolour.


 Jowacoll 103.70z

Min. temp. for
materials, glue and room air [°C]:

15 (not identical with min. temp. of film

Glue application: one- or two-sided
Quantity applied [g/m²]: 150-200
Open time [min.]: 5-8
Pressure [N/mm²] : >0.5
Min. pressing time [min.]:
RT: approx. 30
50 °C:  approx. 4 
90 °C:  approx. 1.5 
Technical Data:
Viscosity[mPas] : approx. 10 000 (Brookfield)
Solids [%]:  approx. 51
Density [g/cm3]:  approx. 1.08
pH value: approx. 3.0
Min. temp. of film formation [°C]: approx. 5
Appearance of the dry glue film: colourless translucent




Machines and equipment may be cleaned after use with warm or cold water,
using Jowat® Cleaner Concentrate 192.40.


May be stored for 6 months after date of delivery ex production site in
properly closed original containers, cool and dry (15 – 25 °C). Protect against

Packaging: Type of packaging and units upon request.

For further information concerning handling, transport and disposal, please
refer to the Material Safety Data Sheet.
Our information on this data sheet is based on test results from our
laboratories as well as on experience gained in the field by our customers. It
can, however, not cover all parameters for each specific application and is
therefore not binding for us. The information given in this leaflet represents
neither a performance guarantee nor a guarantee of properties, nature,
condition, state or quality. No liability may be derived from these indications
nor from the recommendations made by our free technical advisory service.