Upstream of the formatting unit, an ultrathin coat of our special release agent LPZ/II® is applied to the top and bottom face of the workpieces (edge area) by means of an electronically controlled release agent spraying unit. This prevents squeezed out glue from adhering to the workpiece.
An ultra-thin application of our release agent in the edge area (consumption per fine spray nozzle: 1 litre for 5,000 running meters) guarantees a perfect result. The electronically controlled release agent spraying unit only requires a 3 bar compressed air connection and a 230 V outlet.
Our special release agents are adapted to all commercially available glues. The picture on the left shows the installation of the spraying unit outside of the cladding, upstream of the formatting unit with a suitable holder.
On the opposite machine side the unit is connected to the longitudinal fence by a corresponding holder.
the release agent spraying unit can be also installed in the cladding, directly in front of the formatting unit, with a suitable holder. Our fine spray nozzles are insensitive to dust. For this reason, they can be used directly in front of the tools.