Jowacoll 113.10

Application:

General-purpose assembly glue, also for flat bonding of laminate panels.

Fast setting, short open time, tough-elastic glue film.

We recommend that all materials coming into contact with the glue are
made of high-quality stainless steel (German standard V2A or better) or
of inert plastics, e.g. Teflon, PP, polyamide. Avoid contact with other
metals like zinc, brass, copper or aluminum. For more information,
contact the equipment manufacturer or our technical service.

For the standard applicator systems, like brush, spatula, nozzle and roller.
Avoid contact with iron, tanniferous wood may discolour.

Min. temp. for
materials, glue and room air [°C]:

15 (not identical with min. temp. of
film formation).

Tested at 6 – 10 % wood moisture following the standard EN 204/205, with a
glue application of approx. 150 g/m².

Machines and equipment may be cleaned after use with warm or cold water,
using Jowat® Cleaner Concentrate 192.40.

May be stored for 6 months after date of delivery ex production site in
properly closed original containers, cool and dry (15 - 25 °C). Protect against
frost!

For further information concerning handling, transport and disposal, please
refer to the Material Safety Data Sheet.
Our information on this data sheet is based on test results from our
laboratories as well as on experience gained in the field by our customers. It
can, however, not cover all parameters for each specific application and is
therefore not binding for us. The information given in this leaflet represents
neither a performance guarantee nor a guarantee of properties, nature,
condition, state or quality. No liability may be derived from these indications
nor from the recommendations made by our free technical advisory service.