EVA Hot melt adhesive 280.30

EVA hot melt adhesive for edgebanding·unfilled



For bonding edgebands and for precoating of veneer, melamine resin, PVC
and ABS, for flat bonding and softforming procedures, especially for use on a
processing centre (BAZ), also for slow edgebanders.

Characteristics /
Directions for Use:

Elastic, good adhesion. Low melt viscosity and good resistance to oxidation
as well as good colour stability in the melt. The product has a wide range
possible applications due to its good heat-sealing properties, heat resistance
and long hot tack. Very good mechanical processing characteristics, exact
application without hot melt stringing. No surface soiling. The structure of the
edge materials and the processing conditions will influence bonding.
Customer trials before use are recommended.
Processing temperature [°C]: 180 - 200


Technical Data:
Density [g/cm3]:  approx. 1.03
Softening range [°C]: approx. 90 (Kofler)
Appearance: final digit 0 = yellow translucent; 1 = white




Preliminary cleaning while hot by scraping with a spatula. Remove any
residues when cold with Jowat® Cleaner 402.40.


May be stored for 12 months after date of delivery ex production site, cool
and dry.

Packaging: Granulate; types of packaging and units upon request.

For further information concerning handling, transport and disposal, please
refer to the Material Safety Data Sheet.
Our information on this data sheet is based on test results from our
laboratories as well as on experience gained in the field by our customers. It
can, however, not cover all parameters for each specific application and is
therefore not binding for us. The information given in this leaflet represents
neither a performance guarantee nor a guarantee of properties, nature,
condition, state or quality. No liability may be derived from these indications
nor from the recommendations made by our free technical advisory service.